8MM FORUM WORLDWIDE https://8mmforumworldwide.com/ |
|
SANKYO 700 PICS TO DIAGNOSE MY PROBLEM https://8mmforumworldwide.com/viewtopic.php?f=8&t=2277 |
Page 1 of 2 |
Author: | thomas mcnamara [ Tue Jun 20, 2017 11:21 pm ] | ||||
Post subject: | SANKYO 700 PICS TO DIAGNOSE MY PROBLEM | ||||
last post, I mentioned I removed my lens to check to see if it needed to be cleaned, it didn't. put lens back in place properly I think, but now when I put projector on an start to run a film this is what shows on my screen. a big white blob, what on earth iam I doing wrong? film is properly threaded and running thru the projector just fine I think. two other pixs show film running thru film gate and to take up reel. any help, much appreciated.
|
Author: | Chris Smith [ Wed Jun 21, 2017 10:04 pm ] |
Post subject: | Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM |
I think your lens is not properly seated. Looks like it's pushed too far back in the holder. Try a redo on that. |
Author: | thomas mcnamara [ Fri Jun 23, 2017 4:18 pm ] |
Post subject: | Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM |
its a no go chris, i've tried an tried to put lens in correctly, but still get the white blob on screen. dont know what else to do. |
Author: | Chris Smith [ Fri Jun 23, 2017 9:01 pm ] |
Post subject: | Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM |
Thomas, with film threaded and running, move the lens in and out of the barrel. Does it make a difference in the white blob? |
Author: | thomas mcnamara [ Sat Jun 24, 2017 10:32 pm ] |
Post subject: | Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM |
yes chris,the blob either gets smaller or bigger. very strange. |
Author: | Chris Smith [ Sun Jun 25, 2017 1:30 pm ] |
Post subject: | Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM |
Thomas, when you removed the lens to see if it needed cleaning, did you dismantle it in any way? Something is not seated correctly. |
Author: | thomas mcnamara [ Sun Jul 09, 2017 8:13 pm ] |
Post subject: | Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM |
no luck at all chris. maybe something did plop out an i was not aware of it. but i put lens in, still get white blob, not a perfect square. do you know of anyone who does projector repair in the new england area or along the east coast? bought this unit from a person in texas, do not wish to send it his way, will be to big an expense for me. thnx |
Author: | Chris Smith [ Mon Jul 10, 2017 5:59 am ] |
Post subject: | Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM |
Did you take the lens apart, or just remove it from the projector? |
Author: | thomas mcnamara [ Mon Jul 10, 2017 8:59 pm ] |
Post subject: | Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM |
I just removed the lens, that was it. very strange why this is happening. projector runs fine, was refurbished by an individual who has been repairing them for a long time. any body you could recommend so I can send this off an they can take a look at it? |
Author: | thomas mcnamara [ Sat Jul 15, 2017 1:56 am ] |
Post subject: | Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM |
I fixed the lense, veryyy tricky. had to be seated just right. now I know. never taking lense out again. worked up too much of a SWEAT!!!! |
Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |