| 8MM FORUM WORLDWIDE https://8mmforumworldwide.com/ |
|
| The HOT Motor Problem! https://8mmforumworldwide.com/viewtopic.php?f=8&t=2518 |
Page 1 of 1 |
| Author: | Leon Norris [ Wed Feb 13, 2019 12:54 pm ] |
| Post subject: | The HOT Motor Problem! |
I see this problem a lot. The brushes are starting to go in the older models of the GS1200 Elmo Projectors. If you see that the gets real HOT! Then check those brushes! To check those brushes. You have to take off the two black caps. Top and bottom. If they look worn and run down then replace! Also when out take a cotton swab dipped in alcohol to clean. Take swab put in the brush opening and turn the motor fan by hand. You might use a few cotton swabs to get it nice and clean . once clean put the brushes back in. If you don't change or check the motor brushes than the motor could burn out! So beware of this problem! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|