8MM FORUM WORLDWIDE
https://8mmforumworldwide.com/

SANKYO 700 PICS TO DIAGNOSE MY PROBLEM
https://8mmforumworldwide.com/viewtopic.php?f=8&t=2277		 Page 1 of 2
Author:  thomas mcnamara [ Tue Jun 20, 2017 11:21 pm ]
Post subject:  SANKYO 700 PICS TO DIAGNOSE MY PROBLEM
last post, I mentioned I removed my lens to check to see if it needed to be cleaned, it didn't. put lens back in place properly I think, but now when I put projector on an start to run a film this is what shows on my screen. a big white blob, what on earth iam I doing wrong? film is properly threaded and running thru the projector just fine I think. two other pixs show film running thru film gate and to take up reel. any help, much appreciated.

Attachments:
005 (640x360).jpg
005 (640x360).jpg [ 204.56 KiB | Viewed 3176 times ]
004 (640x360).jpg
004 (640x360).jpg [ 215.12 KiB | Viewed 3176 times ]
002 (640x360).jpg
002 (640x360).jpg [ 123.32 KiB | Viewed 3176 times ]
Author:  Chris Smith [ Wed Jun 21, 2017 10:04 pm ]
Post subject:  Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM
I think your lens is not properly seated. Looks like it's pushed too far back in the holder. Try a redo on that.
Author:  thomas mcnamara [ Fri Jun 23, 2017 4:18 pm ]
Post subject:  Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM
its a no go chris, i've tried an tried to put lens in correctly, but still get the white blob on screen. dont know what else to do.
Author:  Chris Smith [ Fri Jun 23, 2017 9:01 pm ]
Post subject:  Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM
Thomas, with film threaded and running, move the lens in and out of the barrel. Does it make a difference in the white blob?
Author:  thomas mcnamara [ Sat Jun 24, 2017 10:32 pm ]
Post subject:  Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM
yes chris,the blob either gets smaller or bigger. very strange.
Author:  Chris Smith [ Sun Jun 25, 2017 1:30 pm ]
Post subject:  Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM
Thomas, when you removed the lens to see if it needed cleaning, did you dismantle it in any way? Something is not seated correctly.
Author:  thomas mcnamara [ Sun Jul 09, 2017 8:13 pm ]
Post subject:  Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM
no luck at all chris. maybe something did plop out an i was not aware of it. but i put lens in, still get white blob, not a perfect square. do you know of anyone who does projector repair in the new england area or along the east coast? bought this unit from a person in texas, do not wish to send it his way, will be to big an expense for me. thnx
Author:  Chris Smith [ Mon Jul 10, 2017 5:59 am ]
Post subject:  Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM
Did you take the lens apart, or just remove it from the projector?
Author:  thomas mcnamara [ Mon Jul 10, 2017 8:59 pm ]
Post subject:  Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM
I just removed the lens, that was it. very strange why this is happening. projector runs fine, was refurbished by an individual who has been repairing them for a long time. any body you could recommend so I can send this off an they can take a look at it?
Author:  thomas mcnamara [ Sat Jul 15, 2017 1:56 am ]
Post subject:  Re: SANKYO 700 PICS TO DIAGNOSE MY PROBLEM
I fixed the lense, veryyy tricky. had to be seated just right. now I know. never taking lense out again. worked up too much of a SWEAT!!!!
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/