Thanks, Barry.
| 8MM FORUM WORLDWIDE https://8mmforumworldwide.com/ |
|
| Bell & Howell DCT Projector. https://8mmforumworldwide.com/viewtopic.php?f=8&t=1687 |
Page 1 of 1 |
| Author: | Mike O'Regan [ Fri Jul 25, 2014 4:16 pm ] |
| Post subject: | Bell & Howell DCT Projector. |
Isn't this similar to the Sankyo 500/700/800 series? How does it compare to the Sankyo? I realise that the 800 is a stereo machine; I had one myself for a few months. I notice a few UK dealers selling them at a high price. |
|
| Author: | Barry Attwood [ Thu Jul 31, 2014 4:05 am ] |
| Post subject: | Re: Bell & Howell DCT Projector. |
Mike, The Bell & Howell DCT is virtually the same as the Sankyo 800 Stereo (it was made by Sankyo for Bell & Howell), all that's really missing is the built in stereo amplifier, but the DCT has 2 direct line outs, so all you have to do is connect the machine to a stereo amplifier (or the like, these days!) and you've got stereo playback. I really rate these machines (I use one for checking my films for listing). and they have one of the best ever loading mechanisms on any projector in my opinion, and what's more they are RELIABLE. This is why they command a high price, the easy loading of film, the stereo capabilities, and the reliability of the actual machine, if only they had a swing out gate, they would be on a par with the dearer Elmo projectors. |
|
| Author: | Mike O'Regan [ Thu Jul 31, 2014 1:38 pm ] |
| Post subject: | Re: Bell & Howell DCT Projector. |
Thanks for that info, Barry. |
|
| Author: | Mike O'Regan [ Thu Sep 18, 2014 5:42 pm ] |
| Post subject: | Re: Bell & Howell DCT Projector. |
What differences are there between the DCT and DCR models? |
|
| Author: | Barry Attwood [ Fri Sep 19, 2014 12:32 am ] |
| Post subject: | Re: Bell & Howell DCT Projector. |
Both the DCM & DCR models are 600' reel capacity and single track machines whereas the DCT is an 800' Twin Track projector. |
|
| Author: | Mike O'Regan [ Fri Sep 19, 2014 1:57 pm ] |
| Post subject: | Re: Bell & Howell DCT Projector. |
Thanks, Barry.
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|