Sorry Frank, it won't work on EX-3500S-1
Thanks just the same.the hunt goes on.....
| 8MM FORUM WORLDWIDE https://8mmforumworldwide.com/ |
|
| WANTED: EIKI EX-3500S-1 mirror https://8mmforumworldwide.com/viewtopic.php?f=22&t=797 |
Page 1 of 1 |
| Author: | Wayne Tuell [ Fri Jul 20, 2012 3:25 pm ] |
| Post subject: | WANTED: EIKI EX-3500S-1 mirror |
Desperately looking for an EIKI EX-3500S-1 mirror either for sale or loan. Sale would be BEST, loan would be short term in order to get dimensions to have a new one possibly made. |
|
| Author: | Frank Moloney [ Sat Oct 27, 2012 5:34 pm ] |
| Post subject: | Re: WANTED: EIKI EX-3500S-1 mirror |
Wayne you might just be in luck. I've got a new mirror I bought a few years ago for my Eiki EX6000 but it turned out to be the wrong mirror. (too small) The markings on it are:- Kokusai Reflectors Type 11- x 21 x 168 Kokusai Shoji Co Ltd. Made in Japan. 81.11 I've measured it and the outer diametre is 110 mm The depth with the mirror sitting on a flat desk surface, measured through the centre hole to the desk is 48mm The centre hole is 26.39 mm. I hope it's the right mirror. What do you think? Regards, Frank. Frank Moloney, New Zealand. |
|
| Author: | Wayne Tuell [ Sat Oct 27, 2012 11:02 pm ] |
| Post subject: | Re: WANTED: EIKI EX-3500S-1 mirror |
I'll look into it to see if it will work Frank and Iwill let you know, thanks |
|
| Author: | Wayne Tuell [ Fri Nov 02, 2012 12:30 pm ] |
| Post subject: | Re: WANTED: EIKI EX-3500S-1 mirror |
Sorry Frank, it won't work on EX-3500S-1 Thanks just the same.the hunt goes on..... |
|
| Author: | Frank Moloney [ Sat Nov 03, 2012 1:56 pm ] |
| Post subject: | Re: WANTED: EIKI EX-3500S-1 mirror |
That's a pity Wayne. Do you know the dimensions of the correct mirror? I may have a used mirror in my spare parts collection that will fit. |
|
| Author: | Wayne Tuell [ Sat Nov 03, 2012 2:53 pm ] |
| Post subject: | Re: WANTED: EIKI EX-3500S-1 mirror |
It is for a friend of mine, I'll get the specs ![[set5_b/set5_b/cheers2.gif]](./images/smilies/set5_b/set5_b/cheers2.gif "cheers")
|
|
| Author: | Richard C Patchett [ Sat Nov 03, 2012 9:52 pm ] |
| Post subject: | Re: WANTED: EIKI EX-3500S-1 mirror |
Greetings Wayne The Eiki part number is 253-32031 Eiki int in the USA And Japan is no longer availabe The Hot mirror # is 222-32131 they may have just one left Im been trying to find one for you since your 1st post But no luck RC |
|
| Author: | Roy Neil [ Sat Nov 03, 2012 10:08 pm ] |
| Post subject: | Re: WANTED: EIKI EX-3500S-1 mirror |
The reflector in question has measurements of: 105 x 22 x 145, d = 27 cm |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|