8MM FORUM WORLDWIDE • View topic - Elmo ST-600 Motor Control Board Wanted

8MM-16MM FORUM WORLDWIDE

The International Forum for 8mm, 16mm, and 9.5mm film
Dedicated To Collectors Around The World
It is currently Thu Sep 21, 2017 6:18 am

All times are UTC - 5 hours [ DST ]

Click on any of the boxes below to link to a new page



Screening Rooms    Ebay Film Sellers    Film/Equipment Sellers    Laurel and Hardy    Magnetic Striping


Our mission is to provide a "free" forum for all members. This forum will not delete, lock up, or edit any posts. On this forum, you are "free" to question any statement that is not understood, and debate any differences you have with another member. We only moderate when a member will not back up his accusations. There are no condescending attitudes from the Administrator or the Moderator. You will be treated with respect. Dan Lail, Admin. and Chris Smith, Moderator



Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Elmo ST-600 Motor Control Board Wanted
PostPosted: Fri Apr 11, 2014 2:26 pm 
Offline
Site Admin
User avatar

Joined: Tue Apr 26, 2011 4:51 pm
Posts: 1936
Location: Loganville, Ga.
Anyone have an Elmo ST-600 motor control board.


Attachments:
ST-600 Motor Control.JPG
ST-600 Motor Control.JPG [ 120.35 KiB | Viewed 1876 times ]

_________________
And now For Our Feature Presentation.

http://www.metroxpressjazz.com/index.html
Top
 Profile Send private message  
 
 Post subject: Re: Elmo ST-600 Motor Control Board Wanted
PostPosted: Mon Aug 18, 2014 7:01 pm 
Offline
Film Expert

Joined: Fri Oct 26, 2012 6:52 pm
Posts: 76
Location: New Zealand
Hi Dan, Yes I've got an Elmo ST600 motor control board if you can't find one anywhere in the US.
The ST180 has the same board so you might be able to find one locally in the USA easier knowing that.
There might be more ST180 parts machines available than ST600's.
Why not try replacing the big electrolytic capacitor and transistor etc in your existing board first. You might be able to get it working again easily.

Cheers Frank.


Top
 Profile Send private message  
 
 Post subject: Re: Elmo ST-600 Motor Control Board Wanted
PostPosted: Mon Aug 18, 2014 8:48 pm 
Offline
Site Admin
User avatar

Joined: Tue Apr 26, 2011 4:51 pm
Posts: 1936
Location: Loganville, Ga.
Frank, I did replace the big transistor, but no luck. I sent you a Pm.

_________________
And now For Our Feature Presentation.

http://www.metroxpressjazz.com/index.html


Top
 Profile Send private message  
 
 Post subject: Re: Elmo ST-600 Motor Control Board Wanted
PostPosted: Mon Aug 18, 2014 11:16 pm 
Offline
Film Expert

Joined: Fri Oct 26, 2012 6:52 pm
Posts: 76
Location: New Zealand
I got your messages thanks Dan, and have pm'd you back.
Will post the board to you tomorrow so you should have it in about ten days.

Frank.


Top
 Profile Send private message  
 
 Post subject: Re: Elmo ST-600 Motor Control Board Wanted
PostPosted: Wed Feb 22, 2017 5:40 pm 
Offline
Film Expert

Joined: Mon Nov 10, 2014 4:07 pm
Posts: 5
Location: NY
Hi Dan,
I was curious how you knew there was a problem with your motor control board.
Last night I plugged in my Elmo ST-180 projector and the motor was relatively slow AND there was not enough torque to move the belt.
However, with no power, the motor shaft spins freely in both directions.

What were your symptoms and how did you resolve them?

Thank you!
David


Top
 Profile Send private message  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group