| 8MM FORUM WORLDWIDE https://8mmforumworldwide.com/ |
|
| NEEDED/ E -clips, set screws and wrench for ELMO ST 800 https://8mmforumworldwide.com/viewtopic.php?f=22&t=1351 |
Page 1 of 1 |
| Author: | Roger Cathey [ Sat Oct 26, 2013 7:53 am ] |
| Post subject: | NEEDED/ E -clips, set screws and wrench for ELMO ST 800 |
Need some of the above. Wrench is referring to set screws. Need to know what size these are. |
|
| Author: | Chris Smith [ Sat Oct 26, 2013 2:04 pm ] |
| Post subject: | Re: NEEDED/ E -clips, set screws and wrench for ELMO ST 800 |
Roger-- I'm trying to figure out your post; I may be able to help, as I have a lot of Elmo parts, but please be specific as to what you need. |
|
| Author: | Roger Cathey [ Sat Oct 26, 2013 3:17 pm ] | |||
| Post subject: | Re: NEEDED/ E -clips, set screws and wrench for ELMO ST 800 | |||
Hi Chris, Sorry about that. I need a few e clips that hold the plastic gears on. I believe there are about three different sizes. Need also set screws in the photos for the metal tension spring caps, one on each side of the projector, and the plastic one next to tension spring. PHOTOS ADDED
|
||||
| Author: | Chris Smith [ Sat Oct 26, 2013 8:29 pm ] |
| Post subject: | Re: NEEDED/ E -clips, set screws and wrench for ELMO ST 800 |
Alrighty--I probably have all that, but we're looking a few days until i get to it. I think I'll first check my "parts" compartment in my projector toolbox. If the stuff is not there--I have a projector "graveyard" to go to (hey, it's Halloween!) Roger, I will get back to you shortly. |
|
| Author: | Roger Cathey [ Sun Oct 27, 2013 8:57 am ] |
| Post subject: | Re: NEEDED/ E -clips, set screws and wrench for ELMO ST 800 |
Thanks Chris, No Big Hurry. |
|
| Author: | Dan Lail [ Sun Oct 27, 2013 9:05 am ] |
| Post subject: | Re: NEEDED/ E -clips, set screws and wrench for ELMO ST 800 |
If Chris does not have them. Leon Norris will. |
|
| Author: | Roger Cathey [ Sun Oct 27, 2013 1:59 pm ] |
| Post subject: | Re: NEEDED/ E -clips, set screws and wrench for ELMO ST 800 |
Thanks Dan, I will keep him in mind just in case |
|
| Author: | Erik Schoolcraft [ Sat Nov 02, 2013 12:27 am ] |
| Post subject: | Re: NEEDED/ E -clips, set screws and wrench for ELMO ST 800 |
Had a Looong and very enjoyable talk with Leon Norris this week. He probably does have the clips you are looking for but they are pretty standard. If you have a local print shop then you can find the same size clips meant nowadays for copy machines. I know it sounds odd but they are called snap ring clips and they are available for a multitude of purposes. If you can't find anything locally then my suggestion is definitly call Leon. He has the biggest supply of parts for Elmo's in the states. |
|
| Author: | Roger Cathey [ Sat Nov 02, 2013 9:01 am ] |
| Post subject: | Re: NEEDED/ E -clips, set screws and wrench for ELMO ST 800 |
Thanks Eric, I will check these out. |
|
| Author: | John Capazzo [ Sun Dec 22, 2013 7:04 pm ] |
| Post subject: | Re: NEEDED/ E -clips, set screws and wrench for ELMO ST 800 |
I have an ST 1200 D parts machine but it's different. I just looked. If anyone has parts to an ST 600 since they're almost identical. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|